Method for quantitative assessment of the domino effect in industrial sites

Accidents caused by the domino effect are the most destructive accidents related to industrial sites. The most typical primary incidents for a domino effect sequence are explosions (57%), followed by fires (43%) (Abdolhamidzadeh et al., 2010). These former can generate three escalation vectors (heat load, overpressure, and fragments), and may affect the surrounding equipments and/or facilities. If the affected targets are damaged, they may also explode and generate other threats to other surrounding facilities and so on. These chains of accidents may lead to catastrophic consequences and may affect not only the industrial sites, but also people, environment and economy. This paper presents a methodology for quantitative assessment of domino effects caused by fire and explosion on storage areas. The individual and societal risks are also estimated.     

Considerable hazards produced by heavy fuel oil in operating thermal power plant in Assiut, Egypt

Heavy fuel oil and ash samples were collected from the Assiut thermal power plant in Egypt and subjected to gamma spectrometry analysis for natural radioactivity contents. Considerable results were observed where the ash contains nearly 1,000 times natural radionuclides more than raw oil. The results were confirmed by measuring the samples via using different devices in different institutions. All ash samples had radium equivalent activities and external hazard index values more than 370 Bq/kg and unity respectively. The mean absorbed dose rate was10,650 nGy/h which is nearly 190 times higher than the global average value of 55 nGy/h. The corresponding annual external effective dose is estimated to be 13 mSv/year, which is nearly 30 times higher than that in areas of natural background radiation (0.46 mSv/year).     

Removal of o-nitrophenol from water by electrochemical degradation using a lead oxide/titanium modified electrode

This study examined o-nitrophenol removal from aqueous solutions by electrochemical oxidation employing a modified electrode. The modified electrode was produced by electrodepositing lead oxide onto a titanium substrate. Following electrochemical oxidation of o-nitrophenol-containing solutions, the remaining o-nitrophenol concentration and chemical oxygen demand (COD) values were determined. The optimum parameters were current density of 40 mA cm(-2), pH of 2.47, 60 min of electrolysis time, 4 g L(-1) NaCl electrolyte solution and temperature of 30 degrees C. Under these optimum conditions of electrochemical degradation using a lead oxide/titanium modified electrode complete removal of o-nitrophenol and COD was achieved.     

High-Resolution Vegetation Data for Mangrove Research as Obtained From Aerial Photography

In this methodological study, the applicability of aerial photographs for monitoring mangrove vegetation dynamics at high resolution was investigated. Vegetation maps of three mangrove forests in Sri Lanka (Galle, Rekawa and Pambala) were produced based on visual analysis of aerial photographs. The visual analysis was aided by applying an interpretation key constructed during a first fieldwork mission. Image attributes used for the identification of individual trees included: gray values, texture, form and size of the crowns and the presence or absence of a shaded side. For the identification of species assemblages, the vegetation structure (i.e. the distribution of individual trees) appeared to be an important attribute. The accuracy and reliability of the vegetation maps were investigated during a second fieldwork mission. The aerial photographs proved to be very useful for the production of genus-based vegetation maps. The error analysis showed that density estimations (quantitative identification) based on aerial photography was not sufficiently accurate for the objectives of the study, but that the overall identification of vegetation assemblages (qualitative identification) coincided most satisfactory with the ground-truth data. In addition to the applicability of aerial photography in monitoring mangroves, the importance of aerial photography in the management of the mangrove ecosystem is clearly highlighted.     

Quality of drinking water and high incidence rate of esophageal cancer in Golestan province of Iran: a probable link

Golestan province in north Iran is known to be a high-risk area for esophageal cancer (EC). Of a long list of multiple risk factors, this study focuses on a possible link between the epidemiologic patterns of EC and the anomalous concentration of some ions and elements in the drinking water sources. A total of 183 samples from 45 villages covering a wide range of EC mortality rates are collected and analyzed. The results demonstrate that NO₃ ⁻, SO₄ ²⁻, Sb, and Sr exceed the recommended maximum concentration level (MCL) in drinking water. This is more prominent in the villages with high esophageal cancer mortality rate, suggesting a possible link between EC incidence and water quality. Se concentration in drinking water increases from low to the high EC areas, a finding contrary to the expected trend. It is concluded that Se deficiency does not play a major role in the etiology of EC in the Golestan province. The statistical results obtained from Mann–Whitney and Kruskal–Wallis tests along with cluster analysis are consistent with the observed trend of EC mortality rate in Golestan province.     

Oxidative potential (OP) and mineralogy of iron ore particulate matter at the Gol-E-Gohar Mining and Industrial Facility (Iran)

Concentrations of total suspended particulate matter, particulate matter with aerodynamic diameter <2.5 μm (PM_2.5), particulate matter <10 μm (PM₁₀), and fallout dust were measured at the Iranian Gol-E-Gohar Mining and Industrial Facility. Samples were characterized in terms of mineralogy, morphology, and oxidative potential. Results show that indoor samples exceeded the 24-h PM_2.5 and PM₁₀ mass concentration limits (35 and 150 µg m^?3, respectively) set by the US National Ambient Air Quality Standards. Calcite, magnetite, tremolite, pyrite, talc, and clay minerals such as kaolinite, vermiculite, and illite are the major phases of the iron ore PM. Accessory minerals are quartz, dolomite, hematite, actinolite, biotite, albite, nimite, laumontite, diopside, and muscovite. The scanning electron microscope structure of fibrous-elongated minerals revealed individual fibers in the range of 1.5 nm to 71.65 µm in length and 0.2 nm to 3.7 µm in diameter. The presence of minerals related to respiratory diseases, such as talc, crystalline silica, and needle-shaped minerals like amphibole asbestos (tremolite and actinolite), strongly suggests the need for detailed health-based studies in the region. The particulate samples show low to medium oxidative potential per unit of mass, in relation to an urban road side control, being more reactive with ascorbate than with glutathione or urate. However, the PM oxidative potential per volume of air is exceptionally high, confirming that the workers are exposed to a considerable oxidative environment. PM released by iron ore mining and processing activities should be considered a potential health risk to the mine workers and nearby employees, and strategies to combat the issue are suggested.     

The depositional setting of the Late Quaternary sedimentary fill in southern Bannu basin,Northwest Himalayan fold and thrust belt,Pakistan

Geostatistical variogram and inversion techniques combined with modern visualization tools have made it possible to re-model one-dimensional electrical resistivity data into two-dimensional (2D) models of the near subsurface. The resultant models are capable of extending the original interpretation of the data to depict alluvium layers as individual lithological units within the 2D space. By tuning the variogram parameters used in this approach, it is then possible to visualize individual lithofacies and geomorphological features for these lithologic units. The study re-examines an electrical resistivity dataset collected as part of a groundwater study in an area of the Bannu basin in Pakistan. Additional lithological logs from boreholes throughout the area have been combined with the existing resistivity data for calibration. Tectonic activity during the Himalayan orogeny uplifted and generated significant faulting in the rocks resulting in the formation of a depression which subsequently has been filled with clay-silt and dirty sand facies typical of lacustrine and flood plain environments. Streams arising from adjacent mountains have reworked these facies which have been eroded and replaced by gravel-sand facies along channels. It is concluded that the sediments have been deposited as prograding fan shaped bodies, flood plain, and lacustrine deposits. Clay-silt facies mark the locations of paleo depressions or lake environments, which have changed position over time due to local tectonic activity and sedimentation. The Lakki plain alluvial system has thus formed as a result of local tectonic activity with fluvial erosion and deposition characterized by coarse sediments with high electrical resistivities near the mountain ranges and fine sediments with medium to low electrical resistivities towards the basin center.     

Microplastic pollution in deposited urban dust,Tehran metropolis,Iran

Environmental pollutants such as microplastics have become a major concern over the last few decades. We investigated the presence, characteristics, and potential health risks of microplastic dust ingestion. The plastic load of 88 to 605 microplastics per 30 g dry dust with a dominance of black and yellow granule microplastics ranging in size from 250 to 500 μm was determined in 10 street dust samples using a binocular microscope. Fluorescence microscopy was found to be ineffective for detecting and counting plastic debris. Scanning electron microscopy, however, was useful for accurate detection of microplastic particles of different sizes, colors, and shapes (e.g., fiber, spherule, hexagonal, irregular polyhedron). Trace amounts of Al, Na, Ca, Mg, and Si, detected using energy dispersive X-ray spectroscopy, revealed additives of plastic polymers or adsorbed debris on microplastic surfaces. As a first step to estimate the adverse health effects of microplastics in street dust, the frequency of microplastic ingestion per day/year via ingestion of street dust was calculated. Considering exposure during outdoor activities and workspaces with high abundant microplastics as acute exposure, a mean of 3223 and 1063 microplastic particles per year is ingested by children and adults, respectively. Consequently, street dust is a potentially important source of microplastic contamination in the urban environment and control measures are required.     

Distribution of potentially toxic elements (PTEs) in tailings,soils, and plants around Gol-E-Gohar iron mine,a case study in Iran

This study investigated the concentration of potentially toxic elements (PTEs) including Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Sb, V, and Zn in 102 soils (in the Near and Far areas of the mine), 7 tailings, and 60 plant samples (shoots and roots of Artemisia sieberi and Zygophylum species) collected at the Gol-E-Gohar iron ore mine in Iran. The elemental concentrations in tailings and soil samples (in Near and Far areas) varied between 7.4 and 35.8 mg kg^?1 for As (with a mean of 25.39 mg kg^?1 for tailings), 7.9 and 261.5 mg kg^?1 (mean 189.83 mg kg^?1 for tailings) for Co, 17.7 and 885.03 mg kg^?1 (mean 472.77 mg kg^?1 for tailings) for Cu, 12,500 and 400,000 mg kg^?1 (mean 120,642.86 mg kg^?1 for tailings) for Fe, and 28.1 and 278.1 mg kg^?1 (mean 150.29 mg kg^?1 for tailings) for Ni. A number of physicochemical parameters and pollution index for soils were determined around the mine. Sequential extractions of tailings and soil samples indicated that Fe, Cr, and Co were the least mobile and that Mn, Zn, Cu, and As were potentially available for plants uptake. Similar to soil, the concentration of Al, As, Co, Cr, Cu, Fe, Mn, Mo, Ni, and Zn in plant samples decreased with the distance from the mining/processing areas. Data on plants showed that metal concentrations in shoots usually exceeded those in roots and varied significantly between the two investigated species (Artemisia sieberi > Zygophylum). All the reported results suggest that the soil and plants near the iron ore mine are contaminated with PTEs and that they can be potentially dispersed in the environment via aerosol transport and deposition.